Practical application analysis

• XXX company uses Zhengchang SFSP138 × 50F, 200kW, sieve plate aperture 1.5×3+2.0×1 crushed corn, actual capacity 23.7t/h;

• Patented alloy hammer blades, increase the crushing efficiency by 30%, increase the fineness and uniformity of fine crushed material

  by more than 30%, reduce the temperature of crushed material by 0.5 ℃;

• Before replacing the feeder, the grinder consumes 11 sieves/month; After replacing the feeder, it only consumes 4 sieves/month;

• Sieve life increased by more than 2.5 times, saving 100 minutes of production time per month and improving efficiency by 20%;

High capacity and low energy consumption

• Upgraded F-type hammer mill increases capacity by 30% and reaches the highest level in China with the same power consumption;

• The original E-type hammer mill can be upgraded by replacing parts, low cost and significantly increased capacity;

Humanized, fully automatic operation

• Automatically adjust the feed amount to ensure the full load operation of the hammer mill and improve efficiency;

• Configurable bearing vibration and temperature remote detection system, automatic fault alarm and shutdown;

Advanced structure and stable operation

• The combination design of multiple chambers in the crushing chamber ensures more uniform wear of hammer and screen mesh;

• The stone removal feeder can remove stones and metals from the raw material, prolong the service life of vulnerable parts.